The AIRmatic suspension system in Mercedes-Benz vehicles is an electronic semi-active suspension that uses air springs and adjustable dampers. The system is designed to provide a comfortable ride while still maintaining control and stability. If you need to reset the AIRmatic system, follow the steps below.
The AIRmatic system in Mercedes-Benz vehicles is a semi-active air suspension that uses electronic control to adjust the level of the vehicle. This system provides a comfortable ride for passengers by softening the impact of bumps in the road. The AIRmatic system is made up of several parts, including air springs, shock absorbers, and leveling sensors. Over time, these parts can become worn out and need to be replaced.
How To Reset AIRmatic Suspension In 12 Easy Steps
If you have ever replaced a part on your AIRmatic system, you may have noticed that the system does not automatically reset itself. In order to reset the system, you will need to follow these steps:
- Park your vehicle on a level surface and turn off the engine.
- Wait for the compressor to shut off completely. This can take up to 30 seconds.
- Press and hold the “air down” button on the dash for 5 seconds.
- Press and hold the “air up” button on the dash for 5 seconds.
- Start the engine and drive forward slowly until the suspension has fully extended.
- Stop the vehicle and turn off the engine.
- Press and hold the “air down” button on the dash for 5 seconds.
- Press and hold the “air up” button on the dash for 5 seconds.
- Start the engine and drive forward slowly until the suspension has fully extended again.
- Stop the vehicle and turn off the engine once more.
- Press and hold both the “air down” and “air up” buttons on the dash for 5 seconds at the same time.
- Start your vehicle’s engine and enjoy your newly reset AIRmatic suspension.
How do you turn off the air suspension on a Mercedes?
There are a few ways to turn off the air suspension on a Mercedes. On most models, you can either use the onboard computer or the key fob. To disable air suspension with the onboard computer, press and hold the “S” button until “OFF” appears on the screen. To disable it with the key fob, press and hold the lock button until “AIR SUSPENSION OFF” appears on the screen.
Can you drive with a broken air suspension?
It depends on the severity of the break. If the suspension is just slightly loose, you may be able to drive with it for a short distance, but if it’s more severe, the car will bounce around too much and it will be difficult to control. In either case, it’s not safe to drive with a broken air suspension and you should have it fixed as soon as possible.
Related: Do struts affect alignment?
What happens when air suspension fails?
When air suspension fails, the car will drop down to the ground because there is no longer anything providing pressure to keep it up. This can result in a number of problems, such as damage to the car’s body, decreased fuel efficiency, and difficulty driving.
Air suspension systems are often used in luxury cars because they provide a smoother ride than traditional coil or strut suspensions. However, they are also more expensive and can be more prone to failure. If you notice that your car is not remaining as elevated as it used to or if you hear strange noises coming from the suspension, you should take it to a mechanic for repair.
Buy Air-Matic Suspension Replacement Parts
Conclusion:
If you need to reset your AIRmatic suspension system, follow the steps above. Remember to drive for at least 10 minutes after resetting the system to allow it to recalibrate itself. If you have any questions about how to reset your AIRmatic suspension, feel free to ask a Mercedes-Benz dealer or qualified technician. Resetting your AIRmatic suspension is a simple process that only takes a few minutes to complete. By following these steps, you can ensure that your Mercedes-Benz rides smoothly and comfortably for many miles to come!
